What problems should be paid attention to in the binding work of push-pull tents?

At present, the use of push-pull tent products in our life and production has been very common. This product can not only play a good rainproof, sunshade and other functions, but also can be used to make tents. However, what we need to pay attention to is that after using the push-pull tent, we should also pay attention to its finishing and binding work.

The first thing we need to pay attention to in our folding and sliding tent products is that the front of the sliding tent is spread out, two side ropes flow out, and the two sides in the length direction are folded to the center line of the push-pull tent. Divide each of the folded sides into thirds, and fold them twice toward the center line. Thirdly, fold both sides of the push-pull tent in the width direction to the horizontal center line of the push-pull tent, and fold them in half to the middle three times in a row, and then be firm. In addition, it is to use reserved rope to tie, tie crosses on both sides, tighten and tie tightly, and plug the rope end.

When using it to cover the goods, pay attention to the ventilation openings. If it is too tight, it will cause water vapor to damage the goods. If the phenomenon of water seepage occurs for too long, it is time to replace the push-pull tent. Secondly, it should also be noted that during use, try to avoid collision with sharp metals. If there is damage, you can use glue to repair it.



BACKYARD TENT FOR OUTSIDE, CANOPY TENT WITH 3 SIDE WALLS, UPGRADED WHITE PARTY WEDDING TENT, WATERPROOF PATIO GAZEBO TENT BBQ SHELTER PAVILION FOR PARTIES GARDEN POOL